To download and install the Rikomagic MK802IIIS recovery software and firmware, you will need a specific utility set to unbrick or update this dual-core Android mini PC. Because this device runs on a Rockchip RK3066 processor, it requires the Rockchip Batch Tool (RKBatchTool) and specialized Rockchip USB drivers rather than standard Android recovery tools. 🛠️ Required Files to Download
To successfully flash the device, you must locate and download these three essential components:
The Firmware Image: A file ending in .img specific to the MK802IIIS.
Rockchip Batch Tool: The application used to execute the firmware flash from a Windows PC.
Rockchip USB Drivers: Essential files that allow your Windows PC to detect the mini PC while it is in recovery mode.
Note: While official files were historically hosted directly on the Shenzhen Rikomagic Tech Download Center, active official links for legacy devices can be offline. If the manufacturer page is unavailable, safe copies of the .img stock ROMs, batch tools, and drivers are widely mirrored on retro Android forums like 4PDA. 💻 Step-by-Step Recovery & Flashing Guide
The recovery process must be performed on a Windows PC using a physical USB cable connection.
[Windows PC with RKBatchTool] <====== USB Cable ======> [MK802IIIS (Reset Button Held)] Step 1: Prep the Software
Download and extract the recovery tool folder on your computer. Open the directory and launch RKBatchTool.exe.
At the top of the program window, click the browse button … to select and load your downloaded firmware .img file. Step 2: Boot into Recovery Mode Keep the MK802IIIS disconnected from your PC at first.
Locate the tiny pinhole Reset button on the casing of the MK802IIIS.
Straighten a paperclip and press down on the reset button. Keep holding it down.
While holding the button, plug the USB cable into the OTG port on the side of the device and connect it to your PC.
Hold the button down for about 5 seconds after connecting, then release it. Step 3: Install the USB Driver Windows will pop up stating it found an unknown device.
Open Device Manager on your PC, right-click the unknown device, and select Update Driver.
Choose “Browse my computer for drivers” and target the extracted Rockchip driver folder matching your operating system version.
Once successful, the square icon numbered “1” at the bottom of the RKBatchTool interface will turn Green. Step 4: Flash the Firmware Click the Restore button inside the RKBatchTool interface.
Avoid choosing “Upgrade,” as “Restore” ensures a clean format to wipe corrupted system errors.
Do not unplug the USB cable or power off the PC during this process.
Wait until the program displays a successful finish message; the mini PC will reboot itself into the fresh factory OS. If you would like, let me know:
Is your MK802IIIS completely bricked (black screen) or stuck on a boot loop?
Which Windows operating system version are you using to flash the device?
I can help find the best available repository or troubleshoot driver connection issues. PCTV2 RIKOMAGIC MK802IIIS – Velleman
Leave a Reply